LEDwholesalers RGB Color Changing Kit with 44-Button Controller, Power Supply, and IP66 Waterproof 16.4-Feet Flexible LED Strip, 2038RGB+3315+3228
- Buy New: $30.99
as of 12/24/2014 23:53 EST details
- Seller:LEDwholesalers ®
- Sales Rank:1,162
- Shipping Weight (lbs):1.4
- Dimensions (in):8 x 7.5 x 2.6
Availability:Usually ships in 1-2 business days
- Energy efficient, super bright LED flexible lighting strip
- Complete kit including waterproof LED strip, controller with wireless remote, and power supply
- No mercury, UV, IR or other deleterious radiation
- Long life up to 30,000 hours
- Waterproof - entire LED strip encased in clear silicone sleeve
* Input Voltage: 12VDC
* Power: 72W max.
* Input Voltage: 100-240V, 50/60Hz
* Output Voltage: 12VDC
* LED Type: 150xSMD5050 RGB
* Input Voltage: 12VDC
* Power: 36W
* Length: 5m (16.4ft)
* Unroll LED strip completely.
* Any exposed wires on the other end of the LED strip must not touch one another (or any metal object), creating a short.
* Connect the 4-pin connector of controller to that of the LED strip, making sure that the arrows line up.
* Connect 5mm DC jack of power supply to controller.
* Remove the plastic seal in the battery compartment of the wireless remote.
* Double check that all connections are correct and secure, then plug in power cord.
* Avoid exposure to direct sunlight.
* Although the LED strip comes with adhesive on the back, silicone is difficult to stick to, therefore use of additional mounting hardware recommended.
* Only the LED strip is waterproof; all wires/connections and other components must be protected from the elements.
* While the included controller can handle the power requirement of two such strips, the power supply only has the capacity to drive a single strip.
* Do not lengthen the LED strip by directly connecting an additional section to it.
* Test all components before permanent installation.
* Make sure that wires at the other end of the LED strip are not touching one another (or any metal object), which would create a short circuit.
* The LED strip is cuttable every 3 LEDs, approx. every 4", at the designated cut marks.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.