Triplett’s TTK-BN1 Electrician's Kit includes a digital multimeter (DMM), a wire stripper, a non-contact voltage detector, and a work light for use in installing, testing, repairing, and maintaining commercial and residential electrical systems. Kit components can be used to diagnose and repair problems such as wire breaks, battery drain, low or high outlet voltage, and electric motor performance. The Triplett TTK-BN1 Electrician's Kit comes with instructions for all components and includes batteries for operating the DMM, the non-contact voltage detector, and the work light.
The Triplett 1101-B digital multimeter (DMM) measures AC and DC voltage, DC current, resistance, and temperature, and tests for transistor gain, continuity, and diode functionality. 19 different ranges and functions are provided for measurement accuracy. The meter has a backlit LCD display for readability in low light, and its data hold function freezes a reading on the display. The DMM comes with a K-type thermocouple probe for measuring temperature, and test leads and screw-on alligator clips are included for connecting the meter to a conductor. The auto power-off feature turns off the unit after 30 seconds of non-use to conserve battery life, and a fuse (included) helps prevent damage to the meter from sudden spikes in voltage or current input. The Triplett SupraStrip TT-241 wire stripper removes insulation on 16- to 30-AWG solid and 18- to 32-AWG stranded wire without damaging the wire. Its SK-5 steel jaws resist corrosion and wear. They are precision ground for sharpness and have serrated-jaw pliers at the ends for crimping and gripping. The SupraStrip TT-241 has built-in bolt cutters, wire cutters, and holes for bending wire loops. The ergonomic handle reduces hand fatigue and can be locked into position, and wire sizes are marked on both sides of the jaws for visibility. The Triplett Sniff-It 9602 non-contact voltage detector senses AC voltage without making contact with the circuit to help protect the operator from shock. It identifies live wires and outlets, traces live wires, and tests whether metal surfaces are grounded. It is double-shielded to help protect hands from shock, and it has a built-in flashlight to light poorly lit work areas. It has a clip for carrying the tool in a pocket. The Triplett Feuzr TT-101 LED work light has a low-intensity 3-LED operating mode and a high-intensity 24-LED mode for providing more or less light in the work area. A non-slip body finish helps prevent accidental drops. A built-in hook, a stand, and magnets on three sides allow the light to be hung from a hook, propped on a flat surface, or attached to a metal object. It comes with a carrying case to help protect the light from damage during transport and storage.
|DMM maximum AC and DC voltage||600V|
|DMM maximum DC current||10 amp|
|DMM maximum resistance||2 megaohms|
|DMM maximum display resolution||1999, 3-1/2 digits|
|DMM International Electrotechnical Commission (IEC) safety category rating||600V category II|
|DMM temperature measurement range||-4 to 1,832 degrees Fahrenheit|
|DMM operating temperature range||32 to 105 degrees Fahrenheit|
|DMM transistor gain test range, NPN or PNP transistors||0 to 1,000|
|DMM continuity test range||0 to 2,000 ohms|
|DMM diode test range||0 to 2,000 millivolts|
|DMM maximum operating relative humidity||85 percent|
|DMM power source||6F22 or NEDA 1604 9V battery (one, included)|
|Non-contact voltage detector sensitivity range||30 to 600V (AC)|
|Non-contact voltage detector IEC safety rating||1,000 V category III, 600 V category IV|
|DMM weight||6 oz.|
|Wire stripper weight||0.35 lb.|
|Non-contact voltage detector weight||0.05 lb.|
|LED work light weight||0.25 lb.|
|DMM dimensions||2.7 x 5.5 x 1.2” (H x W x D)|
|Wire stripper dimensions||6.5 x 2 x 0.75 (H x W x D)|
|Non-contact voltage detector dimensions||6.25 x 0.75 x 0.75" (H x W x D)|
|LED work light dimensions||3.5 x 2.5 x 1.5" (H x W x D)|
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Triplett Corporation manufactures testing and measurement tools for electrical, data and communications, security, safety, and inspection applications. The company was founded in 1904 and is headquartered in Manchester, NH.