|
from: M-D Building Products
List Price: $154.99Amazon.com's Price: $129.99 You Save: $25.00 (16%)Prices subject to change. Availability: Usually ships in 2 to 4 weeks
Binding: Tools & Hardware
Brand: M-D Building Products
EAN: 0043374922967
Label: M-D Building Products
Manufacturer: M-D Building Products
Model: 92296
Publisher: M-D Building Products
Sales Rank: 1163
Studio: M-D Building Products
Features:- Angle accuracy to 1/10 of a degree
- Mode button lets you see angles in 3 ways - degrees, percent slope, or pitch
- Audible tone allows for hands-free operation
- Runs off of a standard 9-volt battery
- Automatic shut-off after 5 minutes
Accessories:
Related Items:
Editorial Review:
Amazon.com Product Description:
Welcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines. You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle. So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate.
SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy. The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it's not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can't, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button.
Many versatile options
If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need. The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.
Simple to use
SmartTool permits you to find level and plumb in two ways. For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module. It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't. So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be. And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).
Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool. Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.
Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes.
Listen and Level Audio Feature
Have tasks where you really can't see the SmartTool but need instant feedback? Then turn on the audio beeper. When turned on with a single button, SmartTool lets you hear when your task is at level or plumb. This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.
Hold
The hold button makes it easy to measure in areas where the digital display is not visible. Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.
Customer Reviews
Average Rating: 
Rating:  - Handy tool for when you need your eyes in two places at once
The level is very well built; robust enough for commercial use. The auto-flip display is not a gimmick and very useful. I like the audible tone of "LEVEL" so you can focus on positioning your work and not needing to look at a display. I used it to map out sag on my home's wood spanners; very practical and made my job easy to accomplish. The read out of degrees, in/ft and % slope is versatile. The calibration is a little complex, so keep you instructions handy. I haven't needed to recalibrate ... Read More
Rating: - On the level.
I first received the 24" level, as a gift from a good friend of mine that has been in wood working most of his life. Most guys would love to have a small portion of his wood shop in their home ( I know I would) I've used it a few times and got some nice results with it, but it wasn't until I had to level out a bath room floor that I found out on what I was missing out on. Using both the 48" to span from left to right to see how much the floor was off and using the 24" to see how much the joist was ... Read More
Rating:  - Beware - The description isn't accuratte
I am in the middle of setting a suspension lift and needed a very precise method of measuring the angles and relationship between the differential flanges and transfer case flanges. After some research, the SmartTool seemed to be the answer. So when I read the companies description, it indicated the the module could be used by itself, with a 2' level, 4' or 6' level. So I ordered the 4' level believing I could use the module to measure the drive flanges and have a very accurate digital level ... Read More
Rating: - Great Level
This level works, its a great level when your working by yourself. Just turn on the audible alarm and when you get to level it beeps. It could not be any more accurate.
Rating: - This level is awesome
I am an accessibility inspector and this level works great for checking slope. I use it for road grade during paving operations. I could use two since everyone always borrows it from me. Great deal and I also recommend Amazon tools. The best price and fast shipping.
|
