Tools & Hardware : Pony 8510BP Cabinet Claw (2-Pack)
|
|
In association with Amazon.com
|
from: Adjustable Clamp Co
List Price: $73.77Amazon.com's Price: $54.28 You Save: $19.49 (26%)Prices subject to change. Availability: Usually ships in 24 hours
Binding: Tools & Hardware
Brand: Pony
EAN: 0044295851022
Label: Adjustable Clamp Co
Manufacturer: Adjustable Clamp Co
Model: 8510BP
Publisher: Adjustable Clamp Co
Sales Rank: 1289
Studio: Adjustable Clamp Co
Features:- 2-pack of cabinet claw clamps; no removal until installation is complete; 1/8-inch standard drill bit
- Strong-holding clamps work with stiles from 1-1/2 to 2 inches wide and up to 1-1/2-inches thick
- Lightweight, rugged aluminum claws and plates; protective felt pads, zinc-plated screws, plastic handles
- Sold as pair
- 4-inch opening capacity; 1-year warranty
Accessories:
Related Items:
Editorial Review:
Product Description:
Fast, easy cabinet installation with dual purpose clamping functions; two-way clamping for tightening and aligning face frames, pre-drilling placement guide for accurate pilot hole drilling and screw fastening. Includes pilot drill bit and non-marring pad protectors.
Amazon.com:
Cabinet installation can be a bear, but this clamp set makes it more than bearable. The unique design is like another pair of hands that grip while you align and tighten the stiles, pre-drill and fasten, and the clamps stay put through the entire process. The drill guides and pilot holes ensure that the 1/8-inch bit (included) hits the mark time after time. We like the professional quality: lightweight but rugged aluminum claws and alignment plates, protective rubber pads that won’t mar your work, 1/2-inch diameter zinc-plated, cold-drawn steel screws with smooth Acme threads. The plastic handles even have grooves for a great grip. These clamps will work with stiles from 1-1/2 to 2 inches wide and up to an impressive 1-1/2 inches thick. We think it’s well worth the price if you’re working alone, whether you’re a professional or a home do-it-yourselfer.--Kris Jensen-Van Heste
Customer Reviews
Average Rating: 
Rating:  - Worth the money
More convenient and faster than using C-Clamps. If one of the stiles refuses to go back flush after tightening up the clamp I use a card board shim only on the side of the stile that needs to be coaxed back flush with the with the other stile. Card board shim strips used for drywall work great.
Rating:  - Well worth the money, why did I wait so long?
After years of using hand clamps, I thought I would give these a try. I couldn't believe how much nicer these were to use. The drill guide is used for the pilot hole and then you swing the guide out of the way and finish with the countersink bit. Put the screw in and you on to the next. A depth stop on the countersink bit makes it easy to stop but I did found that a piece of tape works a little easier and it doesn't get in the way of the drill guide. Since I don't do this for a living, the price ... Read More
Rating: - One of a kind clamp
The Pony cabinet claw clamp is the only clamp that can be used to line up face frame cabinets in two planes. The clamp can be used to clamp two cabinet side face frames together, align them and then provide a drill guide to join them together. The clamps are of good quality and perform well.
Rating: - Helpful, but only for high volume installers
These are very helpful when connecting two flush cabinets together, but most kitchens only have a few of such connections. These clamps obviously don't work when attaching a cabinet to a side panel at the end of a cabinet run, or when attaching a cabinet to a 45 degree corner cabinet, etc. The drilling hole in the side is convenient, but doesn't allow you to use a countersink bit because the hole is too small in diameter (at least for the standard countersink bits that I have), so if you want to ... Read More
Rating:  - Beware of plastic
Worked well until the plastic wing which swings in and out of place for hole drilling and screw placement cracked. Once cracked a few more uses and it sheared sending a little ball bearing and spring into outerspace.
Mine were purchased over a year ago hopefully the manufacturer has changed the design of this fragile part.
|
|
|
